Click image to view full size image
BG1-AXX Battery Meter for 6V/12V/24V/36V/48V Lead Acid Battery
Specification Suit for: 6V/12V/24V/36V/48V SLA Battery Packs Charge Process: Build-in MCU chip, accurate measure battery capacity. LED Indicator: 5 segments LED indicator, 10% capacity resolution. Protections: Reverse polarity protection. Size:42 x 22 x 11mm
Charger of Series BG1-AXX
| Charger Models | Input | Output | Suit for Battery |
|---|---|---|---|
| BG1-A6 | 6V | 6 Volt | |
| BG1-A12 | 12V | 12 Volt | |
| BG1-A24 | 24V | 24 Volt | |
| BG1-A36 | 36V | 36 Volt | |
| BG1-A48 | 48V | 48 Volt |
BG1-A48 48V Lead Acid Car Battery Meter Capacity Tester Gauge
Specification Input: 48V Charge Process: Build-in MCU chip, accurate measure battery capacity. Charger Indicator: 5 segments LED indicator, 10% capacity resolution. Output Protections: Reverse polarity protection. Size: 42 x 22 x 11mm Suit for Battery: 48 Volt Lead-Acid Battery Charger
| BG1-A48 Battery Fuel Gauge Indicator Specification | ||||
| No. | Item | Unit | Specification | Remark |
| Specification | ||||
| 01 | Rating Input Voltage | V | 48V | BG1-A48 for 48V lead-acid battery |
| 02 | Suitable battery type | V | 48V Lead- Acid | |
| 03 | Rating Input current | mA | 10 | |
| 04 | Power-off leakage current | mA | <0.5 | Auto Power-off after 30 minutes |
| Fuel Gauge | ||||
| 05 |
LED1 flashing light LED2~5 off |
10% full capacity | This gauge is designed for discharge and idle condition usage. It is not recommended for charging condition. (If you want to know the charged power, please remove the charger and wait 3~5 minutes) |
|
| 06 |
LED1 solid light LED2~5 off |
20% full capacity | ||
| 07 |
LED1 solid, LED2 flashing LED3~5 off |
30% full capacity | ||
| 08 |
LED1~2 solid light LED3~5 off |
40% full capacity | ||
| 09 |
LED1~2 solid, LED3 flashing LED4~5 off |
50% full capacity | ||
| 10 |
LED1~3 solid light LED4~5 off |
60% full capacity | ||
| 11 |
LED1~3 solid, LED4 flashing LED5 off |
70% full capacity | ||
| 12 |
LED1~4 solid light LED5 off |
80% full capacity | ||
| 13 | LED1~4 solid, LED5 flashing | 90% full capacity | ||
| 14 | LED1~5 solid | 100% full capacity | ||
| Environment | ||||
| 15 | Operate temperature | ºC | -10~+50 | Full load & natural convection. |
| 16 | Operate humidity | %RH | <+90 | Relative humidity, non-condensing. |
| 17 | Storage temperature | ºC | -40~+70 | |
| 18 | Storage humidity | %RH | 0~+95 | Relative humidity, non-condensing. |
| 19 | Cooling | - | Natural convection | |
| 20 | Temperature factor | % | - | |
| 21 | Vibration resistance | - | 5MM/50HZ/600S | Non-operating condition. |
| 22 | Impact resistance | - | 1 meter drop test>=3 times | Non-operating condition. |
| Mechanical | ||||
| 23 | Weight | g | ~10 | |